Treadmill / Exercise Bike / Crosstrainer / Climber
Sensor Kit supplied as a heavier duty cost effective replacement suitable for all Home Use fitness equipment or as a direct replacement on Commercial fitness equipment that is fitted with a Cylindrical (round) type Sensor for the Bike Flywheel or Treadmill Roller Pulley.
In addition these type of Universal Sensors are now also being fitted into Console Emergency Stop Switches of Treadmills where a magnet is used on the fascia to activate the switches contacts, so quite a universal unit
Many "Error 1" Codes are quite often due to mis-aligned, damaged or generally poor quality Sensors fitted to the product. These type of Sensors are quite generic in use and can be found fitted onto a wide range of fitness equipment products within the industry.
Kit comes complete with the following:
x4 Screw on Connectors, x1 Replacement Sensor; 1m of extension wire
For Treadmills: Turn the Treadmill OFF and remove the Plug from the Mains Wall Socket! Then, simply remove the faulty or damaged Sensor and cut the wire a few inches away from the Sensor. Fit the new Sensor onto the machine and join the wires of the new Sensor to the wires of the original wiring using the Screw-on connectors. A length of replacement wire is also included with two extra connectors should the original wiring loom have also been damaged.
Sensor Dimensions: 28mm Long x 6mm Diameter
Sensor Range to Magnet: Up to 5mm maximum (gap)
Part Number: 6-0039
Availability: In Stock
